The slag powder production line is the main processing production line for processing and reusing slag. This production line can bring great economic benefits to investors.
The equipment required for the slag production line process is mainly composed of crushers, grinding mill hosts, analysis machines (powder separators), auxiliary machines, fans, centralized electronic controls and other equipment. Depending on the user, different crushers and grinding mill hosts can be selected. equipment, and there are strict requirements for the moisture content of the slag into the grinding mill. The moisture content must be controlled well. If it is too large or too small, it will affect production.
Production line introduction
In the early years, slag materials were used as discarded materials and had no application. However, in recent years, a large amount of slag materials have been ground and used as raw materials in the construction of major projects. The slag powder production line is a production process technology based on slag materials.

Slag production line process flow
After the slag is measured by the hopper and quantitative feeder, it is sent to the dryer by the belt conveyor for drying. The dried slag enters the ball mill for grinding, and the ground slag is fed by the bucket elevator. It is classified by the powder separator, and the qualified particles are transported to the finished product warehouse by air chute and elevator. Large-grained ore powder is returned to the vertical mill for re-grinding. A dust collector is installed at the discharge end of the mill, and the micropowder collected by the dust collector is transported to the finished product warehouse by an air chute and an elevator.